Posts

IBC-VALVE

IBC Tote Adapter

Several types of barrels are commonly used in industrial barrels, such as conventional IBC totes, plastic water towers, and steel drums. They are often used as hazardous waste shipments.

Used in different environments, the transport container has different interface forms to facilitate the long-term barrier-free disposal of liquid hazardous waste.

IBC totes: conventional IBC totes are basically equipped with valve interfaces; plastic water towers: valve interfaces and non-valve interfaces are common; steel drums: basically no valve

IBC tote interface form:

1. Threaded interface

At present, the outlet interface of the tonnage barrel on the market is mainly a screw interface. The thread diameter is mainly related to the selection of the valve. The common DN50 ball interface diameter is 7.5cm, the DN40 ball interface diameter is 6.2cm, and the butterfly valve interface diameter is 6.2cm, 7.5 cm, 9cm, less common is the DN80 ball valve interface with a diameter of 9cm. The difficulty of sealing of this interface is affected by the degree of thread matching.

ibc fitting
ibc fitting

2. Straight pipe interface

The cost of an IBC tote with straight pipe interfaces is relatively low, and some companies that generate waste will also use this form of IBC totes in order to reduce costs. The current survey has not found relevant data on the diameter of export pipes. This type of interface has a relatively high risk, is likely to cause liquid leakage, and is difficult to seal.

adapter
adapter

3.Flange interface

At present, it is rare that the IBC tote unloading interface on the market is a flange interface, but this type of interface is easier to connect, and the sealing is easier than the above two types.

IBC adapters
IBC Tote Adapter

Solution:

1. Threaded interface

The flange interface has a universal variable diameter, and the specifications are 6.2cm/ 7.5cm/ 9cm, so fixed C-type quick couplings can be used with different reducing joints, as shown in the following figure: agree to purchase 2 inch C-type quick couplings, with 80 to 50/100 Transfer to 50 and other different reducing joints and coarse-toothed to C-type joints. This solution can keep the pipes connected to the diaphragm pump section unchanged, and only the adapter can be replaced.

IBC adapters
IBC Tote Adapter

Conventional IBC tote valves are coarse threads, and some IBC tote valves are fine threads. Therefore, IBC tote valve adapters can be used for conversion, that is, fine threads to coarse threads

IBC Tank Fittings

2. Straight pipe interface

It is difficult to seal the straight pipe interface. In order to ensure that there is no leakage during the disposal process, a certain amount of reducing clamps need to be purchased to seal the diaphragm pump and the diameter interface of the water outlet. At this time, one end can be connected to a fixed C-type quick-change connector.

3. Flange connection

The flange interface is less difficult and the connection is more convenient. In order to reduce the cost, the variable-diameter flange can be processed by itself and then connected to the C-type quick conversion joint.

Are you looking for the IBC tote adapter? Qiming Packaging is a professional supplier specializing in IBC tote fittings such as IBC tote valves, IBC adapters, and IBC top lids, and so on. If you are interested, contact us at mail@qiminggroup.com for a better answer. We’d love to work with you together.

Advanced Layout Editor

Qiming Pack Your More Safety Life!

If you are interested in us, contact us now to get more detail!

Mobile/Whatsapp: 86-15324051286

Company email: mail@qiminggroup.com

Made in China store

IBC-adapters

6 Things You Must Know When Buying IBC Adapter Camlock Couplings

IBC tanks are often used in human daily life. IBC tote is composed of frame, tray, liner, top cover, valve, label, angle guard, baffle, pull rod, elbow and adapter (optional).

The main raw material of IBC tank is high density polyethylene (HDPE), which is tasteless, odorless and non-toxic granular product. It has good heat resistance and cold resistance, good hardness, tensile strength, electrical insulation performance and toughness, and good chemical stability. It is almost insoluble in any organic solvent at room temperature, resistant to corrosion of a variety of acid, alkali and salt solutions, and has excellent resistance to environmental stress cracking and thermal stress cracking. It has high surface hardness and good dimensional stability.

IBC plastic container is stipulated as the designated packaging container for dangerous goods in the world. Now IBC is more and more used in all kinds of liquid, viscous and powder filling and transportation. What follows is essential to the barrel accessories: IBC Adapter Camlock Couplings. The IBC adapter camlock couplings are used to connect the IBC tank and the discharge pipe, or to connect the valve and the discharge pipe.

IBC adapters
IBC adapters

Below are 6 Things You Must Know When Buying IBC Adapter Camlock Couplings:

1.There are different IBC adapters to connect the tote and pipe, such as the adapters with threads, the adapters with female & male threads, NPT thread adapters, BSP thread adapters, the adapters with taps, and some other adapters without threads.

2.The IBC adapters have the strong threads with the good sealing, its material is 100% new HDPE material. Smooth surface and druable body, acid and alkali resistance, and long service life.Different types of adapters and camlock couplings can be matched as per your need.

IBC adapters
IBC adapters

3.There are different sizes for the IBC adapters to meet the different usages. S60*6, 2”, 3/4”, 1” and 1 1/2” are the mostly used sizes.

4.Operating temperature: -20 degrees Celsius ~ +70 degrees Celsius.

5.Working pressure: <0.15Mpa (test pressure <0.2Mpa)

6.Safe use times: 3000 times, and passed the drop test.

All of Qiming IBC adapters camlock couplings adopt high density polyethylene as raw material, and after full engineering injection molding to complete, togehter with new structure, beautiful appearance. It is widely used in various chemical solutions, acid and alkali solutions, organic solvents and other similar containers’ outlet control valves, all valves can be used repeatedly, that will also help protect the environment.

Qiming Packaging is a professional manufacture specializing in IBC tank fittings such plastic IBC top lids, adapters, and valves, etc. If you are interested in any type, contact us today for a prompt answer now. We’ d love to work with you together.

If you do not find the products you want, you can click our another website: IBC FITTING

Mobile/Whatsapp: 86-15324051286

Company email: mail@qiminggroup.com

6 Things You Must Know When Buying IBC Adapter Camlock Couplings

IBC tanks are often used in human daily life. IBC tote is composed of frame, tray, liner, top cover, valve, label, angle guard, baffle, pull rod, elbow and adapter (optional).

The main raw material of IBC tank is high density polyethylene (HDPE), which is tasteless, odorless and non-toxic granular product. It has good heat resistance and cold resistance, good hardness, tensile strength, electrical insulation performance and toughness, and good chemical stability. It is almost insoluble in any organic solvent at room temperature, resistant to corrosion of a variety of acid, alkali and salt solutions, and has excellent resistance to environmental stress cracking and thermal stress cracking. It has high surface hardness and good dimensional stability.

IBC plastic container is stipulated as the designated packaging container for dangerous goods in the world. Now IBC is more and more used in all kinds of liquid, viscous, and powder filling and transportation. What follows is essential to the barrel accessories: IBC Adapter Camlock Couplings. The IBC adapter Camlock couplings are used to connect the IBC tank and the discharge pipe or to connect the valve and the discharge pipe.

Below are 6 Things You Must Know When Buying IBC Adapter Camlock Couplings:

  1. There are different IBC adapters to connect the tote and pipe, such as the adapters with threads, the adapters with female & male threads, NPT thread adapters, BSP thread adapters, the adapters with taps, and some other adapters without threads.

2. The IBC adapters have the strong threads with the good sealing, its material is 100% new HDPE material. Smooth surface and druable body, acid and alkali resistance, and long service life.

Different types of adapters and camlock couplings can be matched as per your need.

3. There are different sizes for the IBC adapters to meet the different usages. S60*6, 2”, 3/4”, 1” and 1 1/2” are the mostly used sizes.

4. Operating temperature: -20 degrees Celsius ~ +70 degrees Celsius.

5. Working pressure: <0.15Mpa (test pressure <0.2Mpa)

6. Safe use times: 3000 times, and passed the drop test.

All of Qiming IBC adapters Camlock couplings adopt high-density polyethylene as raw material, and after full engineering injection molding to complete, together with a new structure, beautiful appearance. It is widely used in various chemical solutions, acid and alkali solutions, organic solvents, and other similar containers’ outlet control valves, all valves can be used repeatedly, which will also help protect the environment.

Qiming Packaging is a professional manufacture specializing in IBC tank fittings such as plastic IBC top lids, adapters, and valves, etc. If you are interested in any type, contact us today at lynettelian@qiminggroup.com or CONTACT US ONLINE for a prompt answer now. We’d love to work with you together.